Peace be upon you, in this biblical lesson I will explain to you step by step how to connect two routers in the same line or the Internet using the same phone line, but before that let's define after starting points.
First, if you are looking for a way to link modem devices in the same phone line, it is technically possible, as well as the issue with the router devices. But the idea is that we'll link the router with a device connected to a telephone line connected to another router for online distribution on Monday.You'll need this process to the following tools.
Cable Internet RG45 100 meters of the type if the distance is far when you'll find a vendor of computer tools
Rutter connected to the Internet
Router that you want to transfer to the Internet in order to redistribute it
To signal that he found in the markets of some router devices that can use Aloyfa the client Client and this may not need a cable to connect the first router with the second router, where it can be by the router device which is available on communication technology Ppoeva client that connects Ppoeva router Almhbok device with a line-up .
Now tiger to setup method:
For Rutter caller online handwriting:
Before Tiger preparation must first know some information about the router device, and between this address information to connect to a router, which often Maicon either 192.168.1.2 or 192.168.2.1 or 192.168.0.1 then you are asked to enter the Chahar router Ausernim and Basord.And you can find Basord router device either in the poster behind the router device, or if you do find it, and you have purchased the device from the online distributor do contact him and ask for your password. If you do not buy from a distributor Search service on the Internet from the default password for your device, or use this entry was a simple way to know Basord home router device .
After the access panel your control, you should learn something important is that each router Eetmtaz device different from other device graphical interface, and so can not be to give you exactly the path that must go to him, but in return I will explain to you what should be looking for in your computer. The point that should be looking for is the DHCP settings / DHCP Server in the router device and often you may find in the settings lan. After that find him a good look at these two addresses which Eptdian b Start ip address and End ip address. Where you should change the last number in the End ip address box. For example, if found in the End ip address 192.168.1.50 figure is only the last number 50 to number 100. Save the settings. As it is located in the image.
The goal of this step is to limit the IP addresses distributed by the router device automatically between figure and 192.168.1.2 to 192.168.1.100. Thus, the problem will not Nstdm overlapping IP addresses for the installation of the second router device.
For a second router:
First, before the installation of the second router in the router connected to the telephone line, we will be well prepared. Turn on the router and brought him to your computer, then the same first steps in the first router device entering the router, which may be 192.168.1.1 or 192.168.2.1 or 192.168.0.1 address. After the access control panel look for Ebi any router settings in the router will look for the preparation of number for a router that we write on the browser box. Which is often either you'll find in the router settings or settings box in lan network settings box. After that you find is the number that you'll find a number 192.168.1.101, was Save the settings.
After restarting your router linking it with the first router device, but before the internet connection using a router connected to the second device to the router first tied with the phone line must do some settings in the computer network card.
These settings include first go to the Control Panel control panel is network and sharing center networks then change the network adapter settings Cards settings. Choose the network used by the communication between and meets or Cable Card, right click, go to properties proprieties were 4 IP settings. And fill in the first column figure follows: 192.168.1.102 in the Mask 255.255.255.0 In the Gateway type 192.168.1.1 in the DNS type 8.8.8.8 was then Balthfaz and so will be able to access the Internet.
I advise you, in the case if it Intermix you watch this episode, where the theme is very similar to this blog post where I will explain to you how you Balڤedio these settings Gap fun